Hi all,
 
   Enclosed is the DC plane eff vs HV. Events are selected 
with Kalman tracking. 5 % of triggers survive the cuts in
eff.kcm, which is also enclosed.

   PC results show some problems. Still working on it.

Sun-Chong

Filename: dceff.ps

use dt geo "/home/e614/e614soft/caldb_ascii/dt_geo.00018"
use fbc1 map "/home/e614/e614soft/caldb_ascii/fbc1_map.00010"
use fbc2 map "/home/e614/e614soft/caldb_ascii/fbc2_map.00010"
use dc str "/home/e614/e614soft/caldb_ascii/dc_str.00010"
use dc t0 "dc_t0.1790m"
use pc t0 "pc_t0.1789"
use sc t0 "sc_t0.1789"
!use dc res "/home/e614/e614soft/caldb_ascii/dc_res.00004"
use dc res "res/resolution_fwhm_it13.dat"
!use dc res  "dc_res.trial3"
!use dc ppc "dc_ppc.1790"
use dc ppc "res/dc_ppc44_cut5.1790"
!use dc ppc "dc_ppc_shifted2.1790"
!use dc ppc "dc_ppc.00000"
use dc prc "dc_prc.00000"
!use dc prc "dc_prc1.1857"
!use dc prc "dc_prc.1degree"

set dc/cuts on
set pc/cuts on
set sc/cuts on
show flags

namelist prcntl 
raw_out = 0
&
show name prcntl 

namelist DCCFLAGS
FindResolution = .FALSE.
FindPlanePos = .FALSE.
FindWirePos = .FALSE.
FindPlaneRot = .FALSE.
FindTDC0 = .FALSE.
&
show name DCCFLAGS

namelist hist
NEVTPROCESSED = 1000000
TDC_MIN = -100
TDC_MAX = 1000
PlaneHists = .TRUE.
FillRawHist = .TRUE.
FillHist = .TRUE.
FillPatternHist = .TRUE.
FillFirstGuessHist = .TRUE.
FillTrackHist = .TRUE.
FillPhysicsHist = .TRUE.
FillXtalkHist = .TRUE.
&
show name hist

name SCFLAGS
S1_SIGNAL = F
S2_SIGNAL = F
&
show name scflags

namelist scset
S1_PEAK = 1000.00
S2_PEAK = 1000.00
&
show name scset

name sccuts
S1_MAX_NHITS   =    -1 
S2_MAX_NHITS   =    -1 
S3_MAX_NHITS   =    -1 
S1_WIDTH_CUT =   -1.00 
S2_WIDTH_CUT =   -1.00 
S3_WIDTH_CUT =   -1.00 
S1_MAX_TDC   =   -1.00 
S2_MAX_TDC   =   -1.00 
S3_MAX_TDC   =   -1.00
S1_MIN_TDC   =   -1.00 
S2_MIN_TDC   =   -1.00 
S3_MIN_TDC   =   -1.00 
S1_MAX_ADC   =   -1.00 
S2_MAX_ADC   =   -1.00 
S1_MIN_ADC   =   -1.00 
S2_MIN_ADC   =   -1.00 
&
show name sccuts

name rfcuts
RF_MIN_TDC = -1. 
RF_MAX_TDC = -1.
&
show name rfcuts

name dccuts
DC_MAXTDC_CUT = 5000
DC_MINTDC_CUT = -5000
DC_MAXWTDC_CUT    = -1. 
DC_MINWTDC_CUT    = -1.
DC_MAX_HITS_IN_PLANE = 3
DC_MIN_PLANES      = 6
DC_XTALK_WCUT    = 0.
DC_NOISE_WCUT    = 0.
&
show name dccuts

name pccuts
PC_MAXTDC_CUT = 2000.
PC_MINTDC_CUT = -2000.
PC_MAXWTDC_CUT    = -1. 
PC_MINWTDC_CUT    = -1.
PC_MAX_HITS_IN_PLANE = 3
PC_MIN_PLANES      = 2
PC_XTALK_WCUT    = 0.
PC_NOISE_WCUT    = 0.
&
show name pccuts

name dcset
FirstPlaneDC = 1
LastPlaneDC = 22
&
show name dcset

name pcset
FirstPlanePC = 1
LastPlanePC = 8
&
show name pcset

name adccuts
PC_Emin = 0.
PC_Emax = 1.e7
SC_Emin = 0.
SC_Emax = 1.e7
&
show name adccuts

name global
BField = 0.0
&
show name global

name KalmanCuts
ChiDiffCluster = 1.E-1
ChiDiffTime = 1.E-1
Chi2sCutCluster = 100000.
Chi2sCutTime = 5.
MaxIterateCluster = 5
MaxIterateTime = 10
enableKalman = .TRUE.
NoiseExcludeMax = 1
&
show name KalmanCuts

name strset
use_cos_increments = .FALSE.
str_angle_inc = 1.0
str_upper_angle_limit = 80.0
&
show name strset

name TimeZero
T0_TDC_MIN = 49995.
T0_TDC_MAX= 50005
FitT0 = .FALSE.
TimeBackwards=.TRUE.
&
show name TimeZero

name FirstGuess
enableFirstGuess = .FALSE.
winPCthreshold =     50.00
winDCstart =    -5000.00
winDCend =    5000.00
&
show name FirstGuess

name HelixFit
enableHelixFit = .FALSE.
&
show name HelixFit

name Rezs
nEventsMax=100000
MinHistFitEntries=5000
calcResidualMethod=2
&
show name Rezs

name Efficiency
RadiusCutDense = 4.0
RadiusCutSparse = 12.0
CellCut = 1
nHitPlanesCut = 0
FindEff = .TRUE.
&
show name efficiency

name Alignment
nEventsPlane = 60000
nEventsWire = 3000000
AlignAngleU = 0.
AlignAngleV = 0.
&
show name Alignment

Created for the The Center for Subatomic Research E614 Project Projects Page.

Created by The CoCoBoard.