Run Plan 

for the Week of November 1 to November 8, 2005

Updated by Ryan Bayes, on Nov 2, 2005


/--------------------------------------------------------
November 1 (Tuesday)

(Suggested)
-Finish the collimator run started last night

-Remove collimators (Grant)

The following is ment to deal with the accumulated M rate
observed when the beam blocker is in

-check gate valve and M13 VA3 for rates
(?-HV off then open VA1 and WV)

Try to understand the lost rate with the production target used 
for the completed data sets

-Take ~1 TEC run (nominal beam)
-change to position #2 on 1AT1 (first graphite target)
-target scan if required(?)
-measure the rates and take >1 TEC run.

If we decide there is time
-Establish CO2/He mixture to get muons to stopping target with the TEC in


/---------------------------------------------------------
November 2 (Wednesday)

Mainentance "day" begins 

-total station measurement of TEC in 2.04T magnetic field
-check the decay of the activity in the beamline
       (-solutions?) 
-replace current T1 target ladder with the old (pre Oct 18) 
T1 target ladder

-ramp to 2.0T

/---------------------------------------------------------

November 3 (Thursday)

Maintenance day continues

*Beam returns in the evening*

Reestablish CO2/He mixture to get muons to stopping target with the TEC in

Start run with TEC+chambers

/---------------------------------------------------------

November 4 (Friday)

interrupt data set for bulge tests (Jingliang, evening)

/---------------------------------------------------------

November 5 (Saturday)

TEC in data set continued 

/---------------------------------------------------------

November 6 (Sunday)

TEC in data set continued 

/---------------------------------------------------------

November 7 (Monday)
TEC in data set concluded

If more allignment data needed: 
-Ramp down 
-120 MeV/c allignment data

/---------------------------------------------------------