micro Run Plan 
Oct 20 and 21, 2005

Oct21 evening

1. Finish solenoid ramp

2. - Measure "standard" 29.6 MeV/c tune and compare with what we saw with the 
     MTEC trigger yesterday etc. 
   - Fine tune B2 to move beam in x and measure again
     => these are characterization runs
   - quads off measurement and compare with 0T measurement

----
Oct20 morning

3. insert 49-hole collimator (defferred until we have data)

4. Remove TEC (Grant)

5. Establish gas degrader mode settings.

6. If ready take 2.0T data set.